Data Recovery Torrent

What is ‘Autochk.Exe Not Found’ Error and How to Recover

Barry — Wed, 16 May 2012 17:00:03 +0000

‘Autochk.exe not found’ error is much frustrating and may throws heavy damage to your system. Most PC users influenced with similar types of errors and ends with huge data loss. So if you are the one facing errors related to ‘Autochk.exe error’ and don’t compromise to loose your valuable data, you should continue reading this article.

What is ‘Autochk.exe’ & how it affects your system

This is an inbuilt part of Microsoft operating systems which gives functionality to revert core system settings back to their original state and to backup where necessary. Autochk.exe is a non essential system process but shouldn’t be terminated unless suspected to be causing problem. Since most software programs uses ‘Autochk.exe’ to write data on system’s registry, it’s possible that registry can accumulate invalid entries which may leads to system failure issues.

Is autochk.exe can be Threat?

If you find autochk.exe somewhere else rather than its originating place (C:\Windows\system32\autochk.exe), most likely that it could be Trojan, spyware, malware or any other types of virus and your system may become inaccessible or shows black screen anytime.

To Fix Corrupted registry now, Download Registry Cleaner Software

How Can I Fix ‘Autochk.exe’ Error?

Method 1: Possible reasons behind ‘Autochk.exe not found’ error could be misplaced or deleted autochk.exe files. To replace the file again, follow steps mentioned below:

Insert Windows installation CD in combo drive and explore folder ‘i386′.
You will find there a file named ‘autochk.exe’, you have to copy and past it on Windows system 32 folder.
Restart the System

Method 2: Besides registry entries or deleted autochk.exe files, bad hard drive or corrupt partition file system may also leads to this error. To fix hard drive related errors, you have to:

Open CMD prompt
Write chkdsk /f and hit enter
This will scan hard drive and fix errors or critical hard drive issues if any.

If the problem still persists or error messages continue to appear, most likely that corrupted system’s registry causing the problem. To fix this, you can download registry Manager and starts a quick scan. Doing this will fix invalid registry entries and system will start to work perfectly as before.

How to Fix Hal.dll error Messages in Windows 7 & Vista

Barry — Thu, 03 May 2012 17:00:04 +0000

There are a huge list of Dll errors that throws different types of irritating messages and may leaves your system in inaccessible state. Whenever, you got in this stage, you have to fix the root of the cause immediately to use Windows anymore. Hal.dll is one of the major dll errors that can severly harm your computer and corrupt your existing hard drive data. Hal.dll error may occurs often in Windows XP, Windows 7 & Vista but the troubleshooting steps are different for XP or Windows 7 & Vista.

If you are using Windows 7 or Vista and see messages like these, you might become beware that something goes wrong and you need to fix it immediately:

“Windows Could not start because the following file is missing or corrupt: C:\Windows\system32\hal.dll”, Please reinstall a copy of the above file.
“Cannot Find C:\Windows\system32\hal.dll”
“C:\Windows\system32\hal.dll missing or corrupt” Please reinstall a copy of the above file

Below mentioned steps will help you to find exactly what happen with the system and the possible steps you can follow to remove error messages related to Hal.dll in Windows 7 & Vista:

Booting Sequence: It’s possible that someone or you has changed the booting sequence in BIOS settings. Check & see weather or not your hard drive is set as a primary booting drive and if not then do it. Sometime, this error comes up due to installing a new internal hard drive and plugging it as an external hard drive might be the simplest solution.

Startup Repair: Windows 7 or Vista comes with an inbuilt functionality to self repair. You have to go at advanced startup mode to choose ‘startup repair’, after which windows will automatically replace the corrupted hal.dll file.

Corrupted Volume Boot Code: A volume boot code is a part of Volume boot record and is used to start the boot loader, which begins the actual loading of the operating system. It becomes the most generic reason of hal.dll error messages when become corrupted or misconfigured. To fix this, follow these steps:

Go to ‘system recovery options’ from Windows installation Disc.

Note: Windows 7 or Vista installation disc is necessary to fix volume boot code.

Open command prompt from system recovery options and run the following command: bootsect /nt60 sys. This command will update volume boot code on the partition used to boot Windows to BOOTMGR.

After successfully updating the volume boot code, you should see this as a confirmation message:

C:(\\?Volume{37a450c8-2331-11e0-9019-806e6f6e6963})
Successfully updated NTFS filesystem bootcode
bootcode was successfully updated on all targetted volumes.

Restart the system.

Check Hard Drive: In most of the cases, your hard drive may itself causes this error and you need to replace it to easily fix hal.dll error messages.

Fresh Windows: If none of the above mentioned steps has helped you, then installing a fresh copy of Windows will be the most prominent solution. But this method will wipe all the data from hard drive, so before performing this step, you should seek some better option for recovering formatted data.

How to Skip the Welcome Screen & Logon Automatically on Windows

Barry — Thu, 26 Apr 2012 17:00:03 +0000

Imagine if you don’t see the logon screen or don’t need to enter admin password all the time before going to start screen. Undoubtedly, cherishing and time saving.
Then here is a simple method to perform, which hardly takes less than a minute but worth a lot more. So, if you get bored with those old windows logon screen and want to automatically logon to a user without entering any password, then follow below mentioned steps:

Open ‘Run’ windows from the ‘Start’ menu or press ‘Window button + R’ to open it directly.
‘Run’ window will popup where you have to enter ‘control userpasswords2′, as shown graphically in the figure below & the press ‘enter’:

Again ‘User Accounts’ Windows will open and you have to uncheck the box stating ‘Users must enter a user name & password to use this computer’.

Click on ‘Apply’ to apply the requested settings.
You will be asked to enter the user name and password of the account, which you wish to automatically logon as for following reboots of your system.

That’s all you have to do to get out of bored window logon screen. Remember, to undo this operation, you have to follow again the same steps except to recheck the box that states ‘Users must enter a user name and password to this computer’.

4 Crucial Steps to Make Hard Disk Data Available Always

Barry — Sat, 31 Mar 2012 17:00:03 +0000

People don’t consider the risks & complexities associated with their hard drive data as they assume that if having a failure & require to shift old hardware with the new one, they’ll be able to quickly acquire whatever they need. But the modern threats and growing hardware denials raises questions on hard drive data safety & security. People have to reconsider this mis-belief and take the possible measures to keep their data safe from any trouble.

You can explore here about all possible ways to keep your vital data safe from any hardware or software problems.

Use Backup

People are advised to take backup of their important data from the hard drive and then use removable storage media devices like flash drive, memory card, CD/DVD etc. to store the backup file. This can help people in making data available in future even if the hard drive has replaced or any hardware equipments become fails.

Several free utilities & tools are available on the Internet now days to securely take backup and host them to any secured place. Dropbox is a great way to take backup as it automatically takes backup of all the data from the hard disk to your dropbox online account. You don’t need to have a speedy Internet connection because it makes the data available offline too & will backup again when you get online.

Cloud Computing:

Taking backup more frequently or again and again could be irritating and time consuming. So if you are seeking some alternative and comply to pay a little amount of money then cloud computing is the best way to securely host your important data on the server & access it from anywhere anytime. Without creating any backup file, you could simply put your hard disk to your cloud computing account. People will get the flexibility to host & share the desired data within office or any specific group. In this way, chances of data loss have reduced to nearly half.

Antispyware or Antimalware:

More than half of the cases related to hardware problems and data corruption are arises due to virus/malware attack. These are the harmful program to affect the stability of system hardware and software. As a result, people could loose their data or their windows become inaccessible. You could remove these harmful programs from your system by using standard Antivirus program.

Doing this will help your system to keep going and bug free

Use External Storage Devices

Transfer your important data onto external storage devices like USB Drive, external hard disk drive or CD/DVD drive. Doing this will reduce the chances of data loss almost nearly half because the data you had on your crashed hard disk will available on different other places too. This storage devices could be very beneficial in case of hard disk crash, Windows Corruption, system inaccessibility etc.

Just in case, if you forget to perform any of the above mentioned steps then data recovery software could be the best possible solutions to recover from almost any sort of data loss conditions. You can easily restore the trashed or malfunctioned data and whole partitions of hard disk in easy steps.

Review by Reader
9.0 out of 10 based on 256 rating

How to Recover Deleted Files Using File Recovery Software

Barry — Wed, 21 Mar 2012 17:00:03 +0000

Are you lost an important file or accidentally deleted it from recycle bin? Actually there may be tons of reasons for which you could lost your precious files. But the good news is that, there are lists of tools and software that could recover your file and can save your years of work.

Basic Facts about Deleted Files

Whenever, any file get deleted either intentionally or accidentally, the files were still reside somewhere in your hard disk (You can’t see or access it) and kept alive as long as the space is not overwritten by another file. To recover the deleted or formatted files, please stop using that disk anymore and download any trusted file undelete software.

How Can I Recover My Files?

You can recover deleted files using Stellar Phoenix file recovery software. This software uses powerful scanning mechanism to scan and preview the recoverable file which can be recovered by the software. It can recover deleted partitions of NTFS, FAT, HFS file system and different type of trashed MS Office Files, media files, Emails etc. It supports all the major versions of Windows and Mac OS.

To recover your deleted files, you need to follow the below mentioned steps:

Download for Windows or Download for MAC & install Stellar Phoenix File Recovery Software
Run the program
Click on ‘Start Recovery’ and a pop up window will appear to choose the desired drive where you think that the deleted data was stored.
Click ‘OK’
This programs scan each sector and blocks and probably takes some time to shows you the heavily damaged file.
After that, the software will shows the list of documents can be recovered by using this software on the right pane
You can buy the premium version of this software to fully recover the data because in the free version, you will only see the preview of recoverable files.

Including File Data Recovery software, you will get some bonus advantages with this software such as:

You can create image of the entire hard disk or a part of it. These created images can be used in case of data loss or partitions inaccessibility.
This software comes with a bootable disc separately for MAC & Windows which will help you if your system fails to start.

Efficient Methods To Recover Hard Disk Data Without Using Backup

Barry — Mon, 19 Mar 2012 05:00:04 +0000

If you are using computer for a while, You might become aware about the facts of hard disk data which indeed exists and plays crucial role towards your success or failure. The data in your System’s hard disk is not safe enough and no one can guarantees for it availability in future. Data contained in the hard drive is extremely easy to wipe or can be made inaccessible either intentionally or accidentally. You may be in big trouble if hadn’t taken the backup or the backup copy gets corrupted. So if you have mistakenly deleted any important file and backup is not available, then hard disk data recovery software is a great alternative to recover deleted files.

Things You Need to Know About Hard Disk

Your hard disk contains platter, spindle motor etc. which forces hard disk to perform any read/write operation. If any of these equipments fail, then your hard drive will become inaccessible or crashed and as a result, the data will deleted. In technical terms, there are two common reasons of hard disk failure: Physical damage caused by the corrupt file system or malware/virus attack & Mechanical failure causes by the hard disk equipments itself such as platter, spindle motor etc. which will prevents hard disk to work properly. There are several other factors could also be responsible such as hard disk overage, virus infection, power surges and many other.

Taking Backup may be the easiest solution to stay away from data loss conditions but everyone be there at some point even if they had taken the backup because the backup file may become corrupted anytime. This is the case when hard drive recovery software comes handy and the single most effective solution to recover your important documents or files.

How Can I Recover My Files If the hard disk is Heavily Damaged

If your hard disk is heavily damaged or crashed, then you need to send it to any hardware data recovery specialist which uses Class 100 clean room to perform data recovery procedure onto the hard disk by using specialist equipment to read every blocks and sectors of platters. Class 100 clean room is used for any scientific purposes or research that contains minimum amount of environment pollutant. But using these services could be little more costly than data recovery software.

How To Restore Data Using Software:

Not every recovery software is effective and can meets your expectation. If you Google the term ‘Disk Recovery Software’, you would found various paid & free data recovery software to restore deleted files but most of them are completely waste of time, effort and money if you had spend any to purchase that. You should well research before paying for any such programs or software. One of the most famous and experienced name in the field of data recovery is Stellar Phoenix which provides quietly efficient and trusty services to their clients and applies fare charges for recovering your data. Moreover, If you had any seriously damaged hard disk, Stellar can provide you Class 100 clean room services at minimal cost.

How to Access Linux Partitions on Windows 7

Barry — Thu, 23 Feb 2012 06:00:04 +0000

Linux is one of third most popular operating system and widely used after Windows & MAC. It uses Ext2, Ext3 etc. based file system to save the data on its partitions alike from Windows which uses FAT12, FAT16, FAT32 based file system & MAC which uses HFS & HFS+ for the same. You can install Windows & Linux on the same PC to taste the benefits of both operating systems by having dual booting configuration.

However, it is not possible to access your Linux partitions while using Windows operating system by default, but Linux features will allow you to access Windows partitions while using Linux.

I had come across an amazing tool that will enable you to access & store your Linux data on Windows partitions even you are using Windows. The tool named ‘Ext2explore (also called Ext2read) can be used to access data from the Ext3 & Ext4 partitions and allows you to save your Linux data onto Windows partitions hard drive.

Wondering about the Steps: Here’s How

Download Ext2explorer from sourceforge.net official website.
Downloaded copy will be in zip format, Unzip it and assign a folder name.

The folder will contain two files(application file & Text document), right click on the application file named ‘ext2explorer’ and go to its properties

Navigate at the bottom of the pop up Windows and check the box right stating ‘run this program as an administrator’
On the same Windows, Under compatibility mode, chose the current Windows operating system that you are using and click OK
Double click on the ext2explorer file to initiate the process,
Prompt Windows will ask you to confirm, Click on Yes
If everything goes all right, you will be taken to the Window where this program shows all the Linux partitions with its containing files & folders
Double click on any folders that you want to access, on the right pane you can see the preview of those
To store any file, right click on it and select yes
A pop up window will open which asks you the path on Windows to save the current files.

By using this tool, you can also take advantage of taking backup of all Linux data without switching in between your operating systems and can freely use in the case of inaccessible Linux partitions.

Restore Accidentally Deleted Photos by Memory Card Recovery Software

Barry — Mon, 20 Feb 2012 18:00:10 +0000

We can store images of our loved ones, special moments, picnics, wedding party etc, in memory card (SD Card) to keep it secured and easy to view anytime for refreshing those golden memories.

Moreover, Memory card is the great reliable and portable way in compare to any other electronic storage devices i.e., anyone can carry it anywhere, anytime without facing any difficulties and can easily be adjusted with mobile phones or digital cameras. The storage capacity of Memory card can vary from card to card but normally range between 2 GB to 64 GB which is sufficient alone to fulfill your need and can store huge number of images, audio and videos etc.

Memory card Corruption can be the nightmare of almost any type of Memory or SD card and can ruins your saved memory within a minute. So if it deleted once then there would be no choice to select other option than SD Card recovery software which can restore all the deleted photos and videos.

SD card is an electronic devices like other devices and can be easily corrupted with harmful factors like Virus attack, power surges, improper uses or overage etc., User can’t able to protect the memory card from happening these kind of unwanted situations rather than taking only precautions to improve the memory card performance. I had already explained some of the main memory card error, but in this article I will list the complete way to recover treasured images from the formatted memory card by using Standard Memory card recovery software. Memory card recovery software use intense mechanism to deeply scan and recover the deleted or formatted images, audio and videos etc. User can recover full memory card documents or as much as they want to, after then user can freely format the memory card to use it any further.

Stellar phoenix photo recovery software is the award winning memory card recovery software that helps user in condition of important photo loss. One of the well known reasons of photo loss is due to of formatting the memory card. So the resolving steps are mentioned below to recover photos from formatted memory card with Stellar phoenix memory card recovery software.

Recovering Photos from Formatted Memory Card:

User need to download the Photo recovery Software from Stellar Phoenix official website
After downloading the software, user need to install and run the software
Plug in the memory card through card reader, and click the option ‘Start Scan’ located on software home screen
User will see the list of currently active devices including the PC hard drives, after which user have to select the memory card
Recovery process will started and soon the user will see the list of recoverable files & folders
Now the user can recover their desired photos or any multimedia files, but this can be done only in the premium version of this software. Otherwise, user can see the preview of recoverable files and folders in free version also.

There are various other problems that can happen with memory card but this Award winning photo recovery software, user can recover from almost any kinds of photo loss situations.

How to Fix “rundll32.exe” Error in Easy Steps

Barry — Thu, 09 Feb 2012 12:00:03 +0000

Rundll32.exe is the most frustrating and annoying error which generally occurs while playing games, accessing computer programs etc. on your PC. It results in improper system shutdown, annoying pop- up windows; “rundll32.exe is missing”, “can’t able to locate rundll32.exe” etc. Most of the users also suffer from data loss situation just because of ignoring this error. It doesn’t matter whether you know about this error or not, but fixing it is really important to maintain stability and integrity of your system.

What is rundll32.exe?

Rundll32.exe is a hosting process of Windows services which is highly used in calling DLL (Dynamic Link Library) files and save as much as information on computer’s memory. It mainly resides at C:\Windows\System32 folder in Windows. You can check it by opening task manager’s process tab.

Cause of rundll32.exe errors?

Rundll32.exe error is associated with system32.dll file and comes when some software or hardware does not respond properly apart from this faulty system32.dll files; virus attack, registry corruption or malicious programs are also leads to this error.

Let’s have a look on some of the rundll32 error types:

“rundll32.exe has generated errors and will be closed by Windows.”
“rundll32.exe failed to initialize.”
“rundll32.exe is missing.”
“explorer.exe class not registered.”
“Windows host process (Rundll32) has stopped working.”

And so on…

Fix rundll32.exe errors in Windows

There are lots of reasons and solutions accordingly. Based on some well known factors, I’m suggesting you some trusted methods to fix rundll32.exe errors:

Uninstall any recently installed software application and in the mean time try to update your system driver as well. Sometime, due to corrupted software application, you may experience this error.
Ensure that the file named rundll32.exe exists in the system32 folder with the same name.
If rundll32.exe not exists, search in your system hard drive partitions.
If you still failed to locate the missing rundll32.exe files, then copy it from any other system with same version of OS in your system.

Note: If you are not a professional user then don’t ever try to do this; it may cause data loss in your system.

I always advice users to use any trusted third party software to fix your registry problems.

Download & run the best registry cleaner software and fix corrupted registries with ease. Anyone can use, doesn’t require any technical knowledge to operate it.

PS: Except all these possible solutions, it’s advisable to take a regular backup of your important data for preventing the data loss conditions.

Hard Drive Data Recovery Giveaways to Recover Deleted or Formatted Data

Barry — Mon, 30 Jan 2012 12:00:05 +0000

A good news for the people who are suffering from data loss due to accidentally or unintentionally formatting or permanently deleting their important data from the hard drive or external storage media. The idea to write this article is surely prove out to be beneficial to help you analyze the exact causes of hard drive corruption and recovering the complete data. All you need is to read the article carefully and pay attention on the various points of hard disk failure reasons you are confronting. To perform the desired steps, there is a minimal level of knowledge and efforts are required and even computer novices can perform some or all the steps.

Most hard drive become eventually fails or become inaccessible without giving any information or warning messages. In majority of cases, users often fail to back up their data, did you? Various equipment glitches or unethical activities like power surges, virus or malware programs causes the boot failure after which you would lose access to the whole data.

These are the moments when you become well-known about your hard-worked data and treasured memories are really worth to you, and you could pay any cost to recover those. Depending on how much your drive is damaged, the cost to recover the data can vary from hundred dollars to thousand dollars. Moreover, after spending much amount of money and time, there is no guarantee that these investments could produce any good results. A good news to ensures that unless and until you hadn’t written your hard disk with any other data, the formatted or permanently deleted data are recoverable through various data recovery software. After deleting or formatting the data, it still existed in the hard drive and occupies very low space. But users wouldn’t able to find and restore them. There are mainly two types of hard disk failure (Logical and Physical) and both can leads to severe data loss or heavily damaged hard drive. In logical failures, the hard drive is not damaged but due to accidentally modifying or deleting the system registries or file systems, the hard drive wouldn’t be able to locate its own data and fails to start the windows. Recent configuration changes, virus programs, software malfunction or updating the system driver could also causes the logical failure of the hard drive. Instead of performing any system utilities or chkdsk command, you should use any well known data recovery software to recover the available data.

In mechanical or physical failure, failed inner equipments (like head or spindle motor) prevent to perform the requested operation. As a result, your hard drive would become crashed or burned and you have to send your hard drive to any data recovery lab where data recovery specialists use Class 100 clean room to recover the data. Clicking noise, drive not recognized by the BIOS or operating system is the most common symptoms of physical or mechanical failure. If you heard some clicking noise (due to head crash) from the hard drive, then stop using it immediately and call to any data recovery experts to prevent any further damaging of the hard drive.